ISIS Driver Release Notes

Version: 1.0.10912.9001
Date: 12/09/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • ISIS-31264 Scanner Connected test fails in Driver test
  • The ISIS driver did not support TAG_SCANNER_CONNECTED. It is supported and confirmed this test pass.

Version: 1.0.10912.2001
Date: 12/02/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Changes

  • Updated for Windows7 support.

Version: 1.0.10907.20002
Date: 07/20/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10907.20001
Date: 07/20/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10907.17003
Date: 07/17/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • Silent install fails.
  • ISS files are not checked out prior to processing. These readonly files don't get updated GUIDs.

Version: 1.0.10907.17002
Date: 07/17/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10907.17001
Date: 07/17/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10907.10003
Date: 07/10/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • PR#13115 Enabling ECDO(all colors) with ISIS driver v1.0.10906.18001causes a Command failure
  • ECDO files were not beinb properly loaded into the driver. Fixed.

Version: 1.0.10907.10002
Date: 07/10/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10907.10001
Date: 07/10/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10906.18001
Date: 06/18/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • PR#13023 ISIS driver hangs when using Multifeed detection
  • Throwing error when double feed is detected and DFAction is set to stop.

Changes

  • Building using Perforce.

Version: 1.0.10903.19001
Date: 03/19/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • ISIS-3414 Kodak I1120: Localization problems
  • Localization strings updated.
  • ISIS-3411 Kodak I1120: Some items under "Pixnet Manager for" dialog are not localized
  • Localization strings updated.

Version: 1.0.10903.6001
Date: 03/06/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • PR#12730 - Images are not cropped correctly when Relative to Document is enabled to deliver corrupted images, with small file.
  • Offset is only set for Fixed to Transport cropping, it was being used for both.
  • ISIS-3318 Kodak i1120 - Config_1 test that disconnect the device will not reconnect
  • Fosters needs a sessionend command on endriver() that returns error when scanner is disconnected. Wrapped command in a try/catch block to ignore error.

Version: 1.0.10902.25002
Date: 02/25/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Version: 1.0.10902.25001
Date: 02/25/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • Missing help files.
  • Added help installer component to setup.xml. Previously it was commented so the build could succeed without the files.

Version: 1.0.10902.24001
Date: 02/24/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • ISIS-3411- Kodak I1120: Some items under "Pixnet Manager for" dialog are not localized.
  • <Fix> Added localized strings to Dialog.
  • ISIS-3408- Kodak I1120: Copyright need to be updated to 2009
  • <Fix> Updated copyright information to 2009.

Version: 1.0.10902.18001
Date: 02/18/09

Known Issues

  • Scanner control Software error is returned when trying to scan a page after nomemory error. This error actually occurs while we are handling the nomemory and it remains on the scan queue until a new pages is scanned. Fixing this issue will involve changing scanner behavior and will be a high risk to take at this stage of the project.

Fixes

  • Problem Report # 12678-Kodak i1120: ISIS became non-responsive during a batch run (Color 300 dpi) and (B&W 600 dpi).
  • <Fix>Hippo runs out of memory while handling images, this is not an ISIS driver bug. However, ISIS was not handling "nomemory" error returned by hippo and this has been fixed.

Version: 1.0.10901.28001
Date: 01/28/09

Changes

  • Updated localization file and Added Help to the project.

Version: 1.0.10901.21001
Date: 01/21/09

Fixes

  • ISIS-3379-Kodak i1120: Firmware version in About tab is different with in Log tab
  • <Fix>Modified About Dialog to be consitent with log Dialog.
  • ISIS-3377-Kodak i1120: Energy Star saver timer range in UI doesn't match Spec
  • <Fix>Based on foster's SRS doc, "The user shall be able to choose a value from 5 to 240 minutes, in 1 minute increments". SRS doc has been updated.
  • ISIS-3376-Kodak i1120: "Transport Timeout" feature is disabled
  • <Fix>Contorl range was not set properly, it's now enabled and within the expexted range values.
  • ISIS-3326-Kodak i1120 - Scanning using Document Type: Text with Photographs encounters "Operation
  • <Fix>Text with Photographs is not available for Fosters, option has been removed from Document types.
  • ISIS-3323-Kodak i1120 - Cropping Relative to document is not cropping the right side of the scanned page correctly.
  • <Fix>imageoffsetx and imageoffsety in windowadd command were not set to start from 0.
  • ISIS-3374-Kodak i1120: Scanner can't be selected with eki1100_1.0.10812.22006 installer
  • <Fix>Mutex function was not getting the right model name,since scanner only supports one model, ScannerID will now be send directly to mutex.

Version: 1.0.10812.22006
Date: 12/22/08

No changes.

Version: 1.0.10812.22005
Date: 12/22/08

No changes.

Version: 1.0.10812.22002
Date: 12/22/08

No changes.

Version: 1.0.10812.22001
Date: 12/22/08

No changes.

Version: 1.0.10808.18001
Date: 08/18/08

Changes

  • Converted Piranha to Fosters.